Sp-controls SP3-AFVP+ Manuel d'utilisateur

SP3-AFVP+Audio Follow Video Preamp Switcher Installation GuideThe Audio Follow Video Preamplifier (AFVP), for use with the SP Controls SmartPanel™ or

Aux Audio (5th Audio Input)A SmartPanel using an AFVP may be configured to use Aux Audio mode, allowing switching audio to a5th stereo audio channel o

Aux Audio Cont’dAux Audio With thePeripheral SwitchAux Audio mode is bestimplemented with the AuxAudio peripheral switch(part no. SLB-MINI-AUX-AUDIO).

Serial Control ConnectionThe AFVP is fully controllable via RS-232 and RS-485 and can be integrated easily with a PC or anycontrol system. Connection

Serial Command Set Rev. 01The serial command set is simple and comprehensive. All functionality of the AFVP can be accessed viaRS-232 or RS-485. The A

Serial Command Set Cont’dVolume can be set directly. Example: L22 sets volume to 22 instantly.Volume can also be ramped using a push/release form

TroubleshootingAudio from the AFVP is distorted, muted, or bleeding across channels.The Pramplifier takes unbalanced stereo input (signal and ground)

Technical SpecificationsWarrantySP Controls warrants all SP3-AFVP+ products and accessories against defects in materials and work-manship for a period

Important Safety Instructions1) Read these instructions. 2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this

Connecting the Control CableFor use with the SmartPanel, connect the AFVP to the back of the Panel on the header labeled AUDIOFOLLOW VIDEO SWITCHER EX

ConfigurationEach audio input may be seperately configured for bass, treble, and gain. If the AFVP is used with theSmartPanel control system, configur

Connecting Audio to InputsFive audio inputs are unbalanced stereo. They will typically be attached to a source device such as aVCR or DVD player, or t

Connecting Audio to OutputMost self-powered speakers and consumer level audio amplifiers have unbalanced inputs (usually RCAor 1/8" mini jack con

Connecting VideoThe AFVP can be configured as a 4x1 composite switcher or as a 2x1 S-Video switcher. The diagramon the cover of the AFVP labels inputs

Mounting the AFVPThe AFVP was designed to mount to the back of the SP2-CHAS with the three screws provided. Thereis no way to mount the AFVP to the SP

Jumper SettingsThrough hardware jumper configuration the AFVP can be configured to:1) Stereo or Mono mode, and2) Video or S-Video switching mode.To co